| Customization: | Available |
|---|---|
| After-sales Service: | 2 Years |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Technical Parameters:
| Item | Unit | Party B | ||
| Loading | Max loading capacity | t | 8 | |
| Hydraulic transverse loading roller (2 sets) | Transverse lifting capacity | t | 10T | |
| Trolley drive speed | m/min | 23.4(The drive shaft is positioned by the shaft shoulder, sleeve and bearing, with two gears, fast and slow) | ||
| Lifting speed | m/min | 13.2 | The trolley moves forward with variable frequency speed regulation to meet the fast and slow speed requirements. All oil circuits are connected by steel pipe wire joints, and each oil cylinder is equipped with a regulating valve at the oil return and oil inlet. Welding of the oil pipe is not allowed, and the oil pipe is placed in the pit. | |
| Qty of transverse trolleys | Set | 5*2 | ||
| Trolley drive reducer power | kw | 5.5*2 | ||
| Motor power of oil pump station | kw | 15*2 | ||
| Conveying speed | m/min | 2.5~4 | ||
| Lifting height | mm | 200~250 | ||
| Hydraulic station protection | Cover shell to protect | |||
| Inlet and Outlet roller | Conveying speed | m/min | 1~4 | |
| Roller surface height | mm | ≈810 | ||
| Roller diameter | mm | 203mm | ||
| Effective width | mm | 2500 | ||
| Roller distance | mm | 600 | ||
| Drive motor power | kw | 4*2 | ||
| Specification of chains | 20A | |||
| Roller in blasting chamber | Roller distance | mm | 600 | |
| Drive power | kw | 4 (include intermediate rollers,) | ||
| Wear-resistant roller material | Roller Q235 | |||
| Qty of wear-resistant rollers | pc | 4 | ||
| Wear-resistant sleeves in cleaning chamber | Material ZGMn13 | |||
| conveying speed | m/min | 1~4 | ||
| Plate chain system | Plate chain pitch | mm | 150 | |
| Conveying profile width | mm | 2200 | ||
| Roller type | V-shaped bearing surface, short-line contact | |||
| Drive motor power | kw | 4 | ||
| structure | Meet the requirements of drying two steel plates (totally 8 stainless steel support points) | |||
| Photoelectric height measuring device | Electric push rod | set | 1 | |
| Detection device | set | 1 | ||
| Item | Unit | Party B | ||
Blasting chamber body |
Material of wear-resistant liners in chamber body | Rolled Mn13, thickness 10mm, life: 12000h | ||
| Liners installation method | Welding between the liners, punching and welding in the middle of liners | |||
| Lower sand leakage plate | Adopt high chromium wear-resistant cast ironδ12*φ12 | |||
| Sealing chamber | Front seal size | m | Subject to actual design | |
| Rear seal | Equipped with scrapper+ 1 layer brush system+ blowing | |||
| Blasting wheel | Single wheel blasting volume | kg/min | 354(curve180-4RK,line speed 80m/s) | |
| Single power | kw | 22 | ||
| Qty | pc | 8 | ||
Easy ware spare parts in blasting wheel are high chromium precision castings, and the liners are sand castings |
||||
| Shot cleaning device | 1 set scrapper | |||
| 1 set brush | Brush sweep diameter | mm | φ900 | |
| Motor power | kw | 3kw | ||
| 1 set shot collecting screw | Screw machine diameter | mm | φ220 | |
| Motor power | kw | 3kw | ||
| Shot blowing air fan | Fan model | 9-19 series | ||
| Motor power | kw | 11 | ||
| Qty | pc | 2 | ||
| Air inlet pipeline diameter | mm | Not less than 150 | ||
| Rise-fall device | Drive power | kw | 1.5 | |
| Qty | pc | 3 | ||
| Rise-fall height | mm | 600 | ||
| Abrasive circulation system | Longitudinal recovery screw conveyor | Shot conveying capacity | t/h | 180 |
| Spiral blade diameter | mm | About φ395 | ||
| Power | kw | 15 | ||
| Qty | pc | 1 | ||
| Shell material | Q235 | |||
| Transverse recovery screw conveyor | Shot conveying capacity | t/h | 180 | |
| Spiral blade diameter | mm | About φ395 | ||
| Power | kw | 11 | ||
| Qty | pc | 1 | ||
| Shell material | Q235 | |||
| Shot replenisher | Installation position | Elevator | Horizontal line +300mm, side of the elevator | |
| Size | mm | 1000*1000*1200(mesh plate thick 4mm. Shot gate is pneumatic control) | ||
| Separator | Motor power | kw | 11 | |
| Model | KFL180 | |||
| Sand filter net | Adopt mesh sand leaking plate | |||
| Shot storage box | Shot storage capacity | t | 9 | |
| Shot diameter | mm | 0.8~1.2 | ||
| Bucket elevator | Elevating capacity | t/h | 180 | |
| Elevating speed | m/s | 1.56 | ||
| Power | kw | 15 | ||
| Qty | pc | 1 | ||
| Shell material | Q235 | |||
| Belt | Special drive belt for polyester core | |||
| Shot supplying system | Shot sliding pipe | The upper part adopts a transparent steel hose and the lower part uses a stainless steel tube, with a thickness of ≥5mm | ||
| Shot gate | pc | 9 (plug plate + adjustable gate device) Model DK50 | ||
| Item | Unit | Party B | |
| Paint spray chamber size | mm | Subject to actual design | |
| Paint spray machine | Drive type | VFD | |
| Spray gun traverse speed | m/min | 30~60 | |
| Spray gun traverse power | kw | 5.5 | |
| Number of spray guns | pc | 4(Changjiang) | |
| Paint pressure | MPa | 10-20 | |
| Paint spray pump | Model | 45:1(Changjiang) | |
| Compression ratio | 45:1 | ||
| Paint spraying amount | L/min | 18 | |
| Quantity | set | 1 | |
| Intake pressure | MPa | 0.4~0.6 | |
| paint spray chamber | Spray gun installation position | Paint spray chamber | |
| Lower maintenance of paint spray chamber | Reserved maintenance pit | ||
| Paint spray | Automatic and manual | ||
| Observation window | Openable | ||
| Paint return valve | Using a stainless steel ball valve and a conical valve | ||
| chamber inspection door | Multiple hinges (see drawings) | ||
| Air control box location | Outside the paint spray chamber (solenoid valve, air control) | ||
| Agitator | 1 | ||
| Paint mixing bucket | Stainless steel material (R=600mm, H=600mm), requires a fixed bracket to facilitate the installation of the agitator for uninterrupted mixing of paint. | ||
| Equipped with automatic cleaning system for spray gun and pipeline | |||
| Item | Unit | Party B |
| Drying chamber material | Adopt steel structure frame, double steel plate (outer layer 3mm thick) | |
| Conveying speed (frequency control) | m/min | 1~6 |
| Drying chamber length | m | About 12 |
| Insulation material | Refractory fiber felt | |
| Heat outlet | Kcal/h | 300000 |
| Draught fan power | kw | 22 (shared with spray booth, produced by Kaitai) |
| Drying chamber temperature | ºC | 0-80 (adjustable) |
| Temperature control mode | Electric contact temperature controller automatic control | |
| Burner | kw | 0.75 |
| Measurement and control point | pc | 2 |
| Transition roller conveyor | Adjustment by cylinder method (single action) | |
| Drying chamber and outlet roller conveyor | Add transition platform | |
| Hot air inlet mode | Form hot air curtains in front and rear side (4 hot air curtains on top and bottom) | |
| Lighting system | Lighting devices (4 fluorescent lamps) are installed in drying chamber and spray chamber | |
| There is one transparent observation door with lighting and two inspection doors on each side of the chamber. Four wind curtains are designed on the top and bottom to directly heat the steel plate, and there are two air intakes on the top and bottom for paint mist treatment. |
||
Our products passed CE/ISO etc.
Kaitai attends almost every exhibition at home and at abroad. We show our products and learn new technology continuously.
We have Air Blast, Sybrandy in the Netherlands, Pumpline in the Australia, Blastman in Finland, which can provide technical and after-sale service in time.
• Q : Do you have after-sale service?
A : Yes, we have perfect after-sale service
• Q : How long can your spare parts be used?
A: Blade, control cage and distributor are high chrome, and can be used for more than 2000 hours.
Various guard liners can be used for more than 3000 hours.
• Q: What standards are you carrying out for your products?
A: We produce according to the ISO9001 and ISO14001 rules.
• Q: How to install the machine?
A: We will arrange 1~2 engineers to your factory to guide installation and assembly.
• Q: Where is your international market?
A: We Have exported to more than 100 countries and regions all around the world, such as: the USA, Canada, Russia, France, Singapore, Australia, Middle East, Brazil, Peru, etc.
){kind=link}